Aerolite 306 Kit 250g 125ml

Description

This much valued urea-formaldehyde/acid hardener glue has been used for many years in boat building and light aircraft wood applications for its strength and dependability of bond.

The powder resin is mixed with warm water into a thin brushable cream and the hardener is applied to the mating surface. The two parts are then clamped in close contact for the set to be completed. Working or open time depends on the ambient temperature and humidity but will be in the region of 5-25 minutes. Similarly the clamping time will be influenced by these factors but will need to be left for 1.1/2 - 3.1/2 hours. However, full strength may take up to 14 days to acquire.

Datasheet:

Aerolite 306 TDS Bradechem

SDS:

Aerolite 306 SDS Bradechem
Aerolite 5325X SDS Bradechem